fedora设置ip(fedora server wifi)

这几天不在学校，回家还得带着猫拨号上网win7下拨号没有问题在Fedora下，拨号上网就没那么简单了 以下是我在fedora 14上尝试的方法(对旧版本fedora也适用)，相当方便Fedora提供了配置工具来设置拨号上网的参数 这里使用了三种工具:pppoe-setup、pppoe-connect和pppoe-stop 但是在使用这些工具之前，先把自己升级到root权限，使用su或者su-command Pppoe-setup:设置拨号参数，使用一次 Pppoe-connect:在终端中输入它来拨号上网 Pppoe-stop:很好理解，这是用来断开链接的 首先，让自己成为root用户(root用户) [cynicholas@cynicholas ~]$ suPassword: 然后运行pppoe-setup命令 [root@cynicholas]# pppoe-setup 然后，您将看到pppoe-setup将输出以下提示 Welcome to the PPPoE client setup. First, I will run some checks onyour system to make sure the PPPoE client is installed properly. 现在它会提示您输入您在ISP处使用的用户名(也称为帐号，例如，我家是座机号码) LOGIN NAME Enter your Login Name (default work): 051212345678 然后你会看到下面的提示这时候他会提示你进入连接的以太网接口您不需要输入任何内容，只需输入默认值 Interface input is connected to the Ethernet interface in PPPoE mode. For Solaris, the interface may be similar to /dev/hme0. For Linux, it will be ethX, where "x" is a number. (default eth0): Now the system asks you if you want to connect to the Internet. Do you want the link to come up on demand, or stay up continuously?If you want it to come up on demand, enter the idle time in secondsafter which the link should be dropped. If you want the link tostay up permanently, enter 'no' (two letters, lower-case.)NOTE: Demand-activated links do not interact well with dynamic IPaddresses. You may have some problems with demand-activated links.Enter the demand value (default no): 接下来我让你输入如何设置DNS参数，我选择输入:server DNS Please enter the IP address of your ISP's primary DNS server.If your ISP claims that 'the server will provide dynamic DNS addresses',enter 'server' (all lower-case) here.If you just press enter, I will assume you know what you aredoing and not modify your DNS setup.Enter the DNS information here: server 现在要求你输入账号对应的密码，系统会要求你输入两次密码进行确认 PASSWORDPlease enter your Password:xxxxx

xPlease re-enter your Password: